Nikon P510 - Manual (Page 202)

E 72
GPS Setting Menu
Re
fere
nce
S
e
cti
o
n
4
Select Save log, and press the
k button.
• The log data is saved to a memory card.
B
Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log recording. When the
battery power becomes exhausted, loge recording ends.
• Log recording ends due to the operation below even when there is time remaining for log
recording.
- The USB cable is connected.
- The battery-chamber/memory card slot cover is opened or closed.
- Record GPS data in GPS options is set to Off (same as when Reset all is performed).
- The setting of the internal clock (time zone or date and time) is changed.
• If time for log recording still remains even when the camera is turned off, log recording is
continuously performed until the preset time has elapsed.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• A maximum of 36 log data events can be recorded in one day.
• A maximum of 100 log data events can be saved to a single memory card.
C
To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 4.
• To erase the log data that is stored in the memory card, press the l button in View log (E73).
Erase log
Save log
End log