Nikon P510 - Manual (Page 162)

E 32
Editing Movies
Re
fere
nce
S
e
cti
o
n
B
Notes on Editing Movies
• Use a fully charged battery to prevent the camera from turning off during editing. When the
battery level is B, movie editing is not possible.
• Once a movie is created through editing, it cannot be used again for extracting a movie. To extract
another range, select and edit the original movie.
• Because the edited movies are extracted in 1-second units, they may vary slightly from the set start
point and end point. Sections shorter than two seconds cannot be extracted.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C
More Information
See “File and Folder Names” ( E98) for more information.
Saving a Frame from a Movie as a Still Picture
A frame from a recorded movie can be extracted and saved as a still picture.
• Pause a movie and display the frame to be extracted
( A100).
• Choose H on the playback control with the multi
selector J or K and press the k button.
• When the confirmation dialog is displayed, choose
Yes and press the
k button to save. To cancel the
saving, choose No.
• The still picture is saved with Normal as the image
quality. The image size is determined by the type
(image size) (
E64) of the original movie.
For example, a still picture saved from a movie
recorded with d HD 1080pP (1920×1080) is i (1920 × 1080 pixels).
7m42 7m42s 7m42s
No
Yes
Copy this frame as a still image?