E “zoom memory, A62) – Nikon P510 User Manual
Page 80
62
j, k, l, m Modes (Setting the Exposure for Shooting)
Sh
ooting Feat
ures
1
The setting menu can also be displayed by pressing the
w (FUNC) button during shooting.
Select the Fn button function in the setup menu (
), and then assign a setting menu
to be displayed when the
w (FUNC) button is pressed.
2
This function cannot be set when using
M mode.
C
More Information
See “Note on the Command Dial Operation When Menus are Displayed” (
A14) for more
information.
C
Features That Cannot Be Used Simultaneously
This feature may not be used in combination with certain features (
Autofocus mode
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
Flash exp. comp.
Adjust the flash output. Use this option when the flash is
too bright or too dark. The default setting is
0.0.
Noise reduction
filter
Set the strength of the noise reduction function that is
normally performed when recording the picture. The
default setting is Normal.
Active D-Lighting
Prevent loss of contrast details in highlights and shadows
when shooting images. The default setting is Off.
Save user settings
The current settings are stored in mode dial
M (A63).
Reset user settings
The settings saved to mode dial
M are reset.
Zoom memory
When the zoom control is operated when set to On, the
camera changes in steps to the focal length (equivalent to
35mm [135] format of angle of view) of the zoom lens that
is set in advance.
• Select On and press the
k button to display the screen
for focal length selection. Press the
k button to switch
the On [w]/Off setting, then press the multi selector
K
to apply the selection.
Startup zoom
position
2
When the camera is turned on, the zoom position moves
to the focal length (equivalent to 35mm [135] format of
angle of view) of the zoom lens that is set in advance. The
default setting is 24 mm.
Option
Description
A