Nikon P310 - Manual (Page 173)

E 53
Shooting Menu (
A, B, C or D Mode)
Re
fere
nce
S
ect
io
n
Flash Exp. Comp.
Compensate the flash output.
Use this option when the flash is too bright or too dark.
The icon for the current setting other than 0.0 is displayed on the monitor (
A6).
Noise Reduction Filter
Set the strength of the noise reduction function that is normally performed when
recording the picture.
Noise reduction filter setting can be confirmed on the monitor when recording a
picture (
A6).
Rotate the mode dial to
A, B, C or D M d button M A, B, C or D tab (A11)
M Flash exp. comp.
Option Description
+0.3 to +2.0
The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3
EV, to make the main subject of the frame appear brighter.
0.0 (default
setting)
The flash output is not adjusted.
-0.3 to -2.0
The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3
EV, to prevent unwanted highlights or reflections.
Rotate the mode dial to A, B, C or D M d button M A, B, C or D tab (A11)
M Noise reduction filter
Option Description
e
High
Perform noise reduction at a level higher than the standard
strength.
M
Normal (default
setting)
Perform noise reduction at the standard strength.
l Low
Perform noise reduction at a level lower than the standard
strength.