Nikon P310 - Manual (Page 63)

45
Scene Mode (Shooting Suited to Scenes)
Sh
ooting Feat
ures
y M o Backlighting
Use when light is coming from behind the subject, throwing features or details into shadow.
HDR (high dynamic range) composition can be set on the screen that is displayed when
o Backlighting scene mode is selected.
• When HDR is set to Off (default setting): The flash fires to
prevent the backlit subject from being hidden in shadow.
- Shoot pictures with the flash raised.
- The camera focuses at the center area of the frame.
- Press the shutter-release button all the way to shoot a
single picture.
• When HDR is set to Level 1-Level 3: Use when taking
pictures with very bright and dark areas in the same frame.
Select Level 1 when there is less difference between bright
and dark areas, and Level 3 when there is more difference
between bright and dark areas.
- The P icon is displayed on the shooting screen.
- The camera focuses at the center area of the frame.
- When the shutter-release button is pressed all the way,
the camera shoots pictures continuously and saves the following two images.
- Non-HDR composite image
- HDR composite image (loss of detail is reduced in highlights and shadows)
- The second image saved is an HDR composite image. If there is only enough memory
to save one image, an image processed by D-Lighting (
A84) at the time of shooting,
in which dark areas of the image are corrected, is the only image saved.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image will be
narrower than that seen on the monitor at the time of shooting.
- Depending on the shooting conditions, dark shadows may appear around bright
subjects and bright areas may appear around dark subjects. You can compensate by
lowering the level setting.
- Use of a tripod is recommended. Set Vibration reduction in the setup menu ( A98)
to Off when using a tripod to stabilize the camera.