Nikon P310 - Manual (Page 71)

53
A, B, C, D Modes (Setting the Exposure for Shooting)
Sh
ooting Feat
ures
A (Programmed auto) (E10)
Use for automatic control of the exposure by the camera.
• Different combinations of shutter speed and aperture
value can be selected without changing the exposure
by rotating the command dial during shooting
(“flexible program”). While flexible program is in effect,
a flexible program mark (A) is displayed next to the
mode indicator (
A) in the upper left of the monitor.
• To cancel flexible program, rotate the command dial until the flexible program
mark (A) is no longer displayed. Selecting another shooting mode, or turning
off the camera, also cancels flexible program.
B (Shutter-priority auto) (E10)
Use to shoot fast moving subjects with a fast shutter
speed, or use to emphasize the movements of a
moving subject with a slow shutter speed.
• The shutter speed can be adjusted by rotating the
command dial.
C (Aperture-priority auto) (E10)
Use to blur the background or bring both the
foreground and background into focus.
• The aperture value can be adjusted by rotating the
multi selector.
D (Manual) (E12)
Use to control the exposure according to shooting
requirements.
• When adjusting the aperture value or shutter speed,
the degree of deviation from the exposure value
measured by the camera is displayed in the exposure
indicator. The degree of deviation in the exposure
indicator is displayed in EVs (–2 to +2 EV in
increments of 1/3 EV).
• The shutter speed can be adjusted by rotating the command dial and the
aperture value can be adjusted by rotating the multi selector.
1/250 1/250 1/250 F5.6 F5.6 F5.6 840 840
25m 0s 25m 0s
840
25m 0s
1/250 1/250 1/250 F5.6 F5.6 F5.6 840 840
25m 0s 25m 0s
840
25m 0s
1/250 1/250 F5.6 F5.6 1/250 F5.6 840 840
25m 0s 25m 0s
840
25m 0s
1/250 1/250 1/250 F5.6 F5.6 F5.6 840 840
25m 0s 25m 0s
840
25m 0s
Exposure indicator