Using the flash (flash modes), A60) men, A60) se – Nikon P310 User Manual
Page 78: A60), s, A60), Information on flash mode
60
Features That Can Be Set Using the Multi Selector
Sh
ooting Feat
ures
Using the Flash (Flash Modes)
You can shoot pictures with a flash by raising the flash. You can set a flash mode that
suits the shooting conditions.
1
Slide the
K
(flash pop-up) control to raise
the flash.
• When the flash is lowered, the flash mode is fixed at W
(off).
2
Press
H
(
m
flash mode) on the multi selector.
3
Use the multi selector to select the desired
mode and press the
k button.
• See “Available Flash Modes” (
information.
• If the
k button is not pressed within a few seconds,
the selection will be canceled.
• When U (auto) is applied, D is only displayed for
a few seconds, regardless of Photo info settings
(
4
Frame the subject and take a picture.
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On:
The flash will fire when you press the
shutter-release button all the way.
- Flashing:The flash is charging. The camera cannot
take pictures.
- Off:
The flash will not fire when a picture is
taken.
• If the battery is low, the monitor will be turned off while
the flash is charging.
Auto