Nikon S810c - Manual (Page 114)

88
U
si
ng
A
n
d
roid
OS
An Internet connection is required in order to use online service. Configure the
Wi-Fi (wireless LAN) network before using the Internet.
Setting Up a Wi-Fi (Wireless LAN) Network
You must have access to a Wi-Fi (wireless LAN) network. Before configuring the
Wi-Fi (wireless LAN) settings on the camera, make sure that your Wi-Fi (wireless
LAN) network is set up and that you know your network SSID and password.
1
Tap the ON/OFF button to
turn it ON.
• The Wi-Fi (wireless LAN) function
turns on, and a list of available
SSIDs (names of Wi-Fi (wireless
LAN) networks) is displayed on
the screen.
• It may take a few seconds for the
Wi-Fi (wireless LAN) function to turn on.
2
Tap the desired SSID, enter
the password, and tap
Connect.
• When the connection is
established, Connected is
displayed under the network
SSID.
• The camera will remember the
security information, allowing you to connect without entering the details
again.
• You can connect to an open network without entering a password, but it
may not be secure. Before connecting, check the icon displayed to the right
of the SSID to determine whether the network is open or secure.
• To end the network connection, tap the selected SSID and tap Forget.
Using the Internet
Press the W button M Settings M Wi-Fi
Wi-Fi
To see available networks, turn Wi-Fi on.
15:30
OFF
Secured with WPA/WPA2(WPS available)
Wi-Fi ON
15:30