Nikon S810c - Manual (Page 151)

E 25
Re
ference
S
ec
ti
o
n
q Tapping the Monitor to Release the Shutter (Touch
Shutter)
Tap the desired subject to take
a picture.
• Do not use force when tapping the
monitor as this may cause slight
movement of the camera, resulting in
blurred images.
• When digital zoom is in effect, the
camera focuses on the subject at the
center of the frame.
• The shutter-release button can also be used when the touch shutter option is
selected.
• If X is displayed in the monitor, the
shutter cannot be released. Tap an area
inside the
X.
B
Notes About Touch Shutter
• The focus area that can be set varies depending on the shooting mode (E24).
• Prevent shooting with accidental tapping of the monitor by changing the touch
shooting setting to Touch AF/AE ( E28) (except in some scene modes). At this
setting, the shutter is not released when the monitor is tapped.
• When a subject displayed in the monitor is tapped with the self-timer (A49)
enabled, the camera locks focus and releases the shutter after ten or two seconds.
• The setting may not be changed when using certain settings of other functions.
Enter the shooting screen M Press the d button M q/s/r Touch
shooting
M q Touch shutter M Press the d button
1910 1910 1910
1910 1910 1910