Troubleshooting, Power supply, display, and settings – Nikon S810c User Manual
Page 205
Tech
n
ical
No
te
s an
d
In
d
ex
F
7
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power Supply, Display, and Settings
Troubleshooting
Problem
Cause/Solution
A
The camera is on but does not
respond.
Wait for recording to end. If the
problem persists, turn the camera
off. If the camera does not turn off,
remove and reinsert the battery or
batteries or, if you are using an AC
adapter, disconnect and reconnect
the AC adapter. Note that although
any data currently being recorded
will be lost, data that have already
been recorded will not be affected
by removing or disconnecting the
power source.
Battery inserted in the camera
cannot be charged.
Confirm all connections.
Camera cannot be turned on.
• The battery is exhausted.
Camera turns off without
warning.
• The camera is turned off by the
shut-down timer.
• The internal temperature of the
camera is high. Allow the camera
and memory card to cool and
turn on the camera again.
• The camera and battery may not
operate properly at low
temperatures.
• No battery power remains.
18,
Monitor is blank.
• The camera is off.
• The camera has entered display
off mode or stand by mode to
save power. Press the power
switch.
Camera becomes hot.
The camera may become hot when
shooting movies for an extended
period of time or when the camera
is used in a hot area; this is not a
malfunction.
–