Nikon S810c - Manual (Page 159)

E 33
Re
ference
S
ec
ti
o
n
Preset Manual
Follow the procedure below to measure the white balance value according to
the light source when shooting.
1
Place a white or gray reference object under the lighting
that will be used during shooting.
2
Tap b in the White
balance menu.
• The camera zooms in to the
position for measuring white
balance.
• To end the setting screen
without measuring, press the
V
button.
3
Frame the reference
object in the measuring
window.
• To apply the most recently
measured value for preset
manual, tap Cancel.
4
Tap Measure to measure
the value.
• The shutter is released and the
measurement is complete. No
image is saved.
• The screen shown in step 2 is
displayed again. Tap I to exit
the setting screen.
B
Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting
using the flash, set White balance to Auto or Flash.
White balance
Incandes. Incandes. Incandes. Fluorescent Fluorescent Fluorescent Cloudy Cloudy Cloudy
Auto Auto Auto
Preset Preset
manual manual
Preset
manual
Daylight Daylight Daylight
Preset manual
Measure Cancel
Measuring window
Preset manual
Measure Cancel