Nikon S810c - Manual (Page 184)

Re
ference
S
ec
ti
o
n
E 58
Blink Warning
Specify whether or not the camera detects human subjects that blink when
shooting with face detection (
A61) in the following modes:
• G (easy auto) mode (A34)
• A (auto) mode (when Face priority is selected for AF area mode option)
(
A35).
• Portrait or Night portrait is selected for the scene mode (A37).
Operating the Blink Warning
Screen
Faces detected by the blink warning
are displayed inside a border.
The operations described below are
available.
• To enlarge the face: Move the zoom
control toward g (i). If more than
one face is detected, tap M or N to select the desired face.
• To switch to full-frame playback: Move the zoom control toward f (h).
• To delete the current image: Tap E.
• If you tap the I button, or if no operations are performed for a few
seconds, the camera returns to shooting mode.
B
Notes About Blink Warning
• The blink warning is disabled when a setting other than Single (A30) is used for
the continuous setting.
• The blink warning may not function properly in some shooting conditions.
Display the shooting or playback screen M Press the d button M z Set
up
M Blink warning
Option Description
o On
When one or more human subjects may have
blinked in an image taken using face detection, the
blink warning screen is displayed in the monitor.
Should this occur, check the image and determine
whether or not another image should be taken.
p Off (default setting)
Blink warning is disabled.
Did someone blink?