Error messages – Nikon S810c User Manual
Page 194
Re
ference
E
68
Refer to the table below if an error message is displayed.
Error Messages
Display
Cause/Solution
A
Battery temperature
is elevated.
The camera will turn
off.
The camera turns off automatically. Wait until
the camera has cooled before resuming use.
–
The camera will turn
off to prevent
overheating.
Battery temperature
high.
Charging stopped.
Turn off the camera, and allow the battery to
cool down before you resume charging.
Camera temperature
high.
Wi-Fi disabled.
The inside of the camera has become hot, and
the Wi-Fi (wireless LAN) function has stopped.
Press OK and allow inside of camera to cool
down before resuming use.
–
Camera temperature
high.
Wireless disabled.
The inside of the camera has become hot, and
the connection between camera and smart
device has been terminated.
Press OK and allow inside of camera to cool
down before resuming use.
–
Please wait.
The camera cannot perform other operations
until processing is complete. Wait until message
clears from display automatically when
processing is complete. Do not open the battery-
chamber cover or memory card slot cover during
processing.
–
This card cannot be
used.
An error occurred while accessing the
memory card.
• Use an approved card.
• Check that the terminals are clean.
• Check that the memory card is correctly
inserted.
This card cannot be
read.
Charging error.
A charging error occurred while operating
the camera. Disconnect the USB cable from
the camera.
Out of memory.
Delete images or insert a new memory card.