Nikon D5300 - Manual (Page 129)

109 P, S, A, and M Modes
2
Display bracketing options.
Press the P button, then highlight the
current bracketing setting and press J.
3
Select a bracketing increment.
Highlight a bracketing increment and press
J. Choose from values between 0.3 and
2 EV (AE bracketing) or 1 to 3 (WB
bracketing), or select ADL (ADL bracketing).
4
Frame a photograph, focus, and shoot.
AE bracketing : The camera will vary exposure
with each shot. The first shot will be taken at
the value currently selected for exposure compensation. The bracketing
increment will be subtracted from the current value in the second shot and
added in the third shot, “bracketing” the current value. The modified values are
reflected in the values shown for shutter speed and aperture.
WB bracketing : Each shot is processed to create three copies, one at the current
white balance setting, one with increased amber, and one with increased blue.
ADL bracketing : The first shot after bracketing is activated is taken with Active
D-Lighting off, the second at the current Active D-Lighting setting ( 0 94; if
Active D-Lighting is off, the second shot will be taken with Active D-Lighting set
to Auto).
In continuous high-speed and continuous low-speed release modes, shooting will
pause after each bracketing cycle. If the camera is turned off before all shots in the
bracketing sequence have been taken, bracketing will resume from the next shot in
the sequence when the camera is turned on.
P button Information display