Nikon D5300 - Manual (Page 189)

169 Wi-Fi
WPS (Android Only)
1
Enable the camera’s built-in Wi-Fi.
Press the G button to display the menus,
then highlight Wi-Fi in the setup menu and
press
2. Highlight Network connection
and press 2, then highlight Enable and
press J. Wait a few seconds for Wi-Fi to
activate.
2
Connect.
Enable WPS button connections on the camera and smart device:
• Camera: Highlight Network settings and
press 2.
Highlight Push-button WPS and press 2
to ready the camera for a WPS connection.
The camera will wait about two minutes
for a WPS connection request from the
smart device. To extend the wait time,
press
J.
• Smart device: Select Wi-Fi settings > WPS button connection.
3
Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device. The main dialog will be
displayed.
G button