Clean at startup/shutdown – Nikon D5300 User Manual
Page 262
242 Technical Notes
❚❚“Clean at Startup/Shutdown”
1
Select Clean at startup/shutdown.
Select Clean image sensor, then highlight Clean
at startup/shutdown and press
2.
2
Select an option.
Highlight an option and press
J. Choose from
Clean at startup, Clean at shutdown, Clean at
startup & shutdown, and Cleaning off.
D
Image Sensor Cleaning
Using camera controls during startup interrupts image sensor cleaning.
Cleaning is performed by vibrating the image sensor.
If dust can not be fully removed using
the options in the Clean image sensor menu, clean the image sensor manually (
consult a Nikon-authorized service representative.
If image sensor cleaning is performed several times in succession, image sensor cleaning
may be temporarily disabled to protect the camera’s internal circuitry.
Cleaning can be
performed again after a short wait.