Nikon D5300 - Manual (Page 94)

74 More on Photography
Location Data
Embedding Location Data in Photos and Movies
The built-in location data unit can record information on the camera’s current
position (latitude, longitude, altitude) and the current time (UTC) as provided by
satellite navigation systems and embed it in photographs and movies taken with the
camera. The location data function works best in locations that offer an
unobstructed view of the sky.
1
Select Location data.
Press the G button to display the menus,
then highlight Location data in the setup
menu and press
2.
2
Select Record location data.
Highlight Record location data and press
2.
3
Select On.
Highlight On and press J to enable the
camera’s built-in location data unit. The
camera will begin receiving location data
from navigation satellites.
A
Before Enabling the Location Data Function
Before using the location data function, read the warnings on pages viii to xv and make sure
that the clock is set to the correct time and date as described on page 201. To prevent the
camera turning off unexpectedly, make sure the battery is charged.
G button