Nikon D5300 User Manual
Page 95
75
4
Check satellite signal strength.
Press the
R button and check satellite signal
strength in the information display.
5
Take pictures.
The location data obtained via the navigation satellite system will be recorded
with each photograph or movie taken and can be viewed in the playback photo
info displays (
0 136) or plotted on a map using the supplied ViewNX 2 software
(
6
Turn the location data function off.
To turn the location data function off when it
is no longer needed, select Off for Location
data > Record location data in the setup
menu.
A
The Satellite Signal Indicator
Signal strength is shown in the location data display as follows:
•
# (static): Camera records latitude, longitude, and altitude.
•
$ (static): Camera records latitude and longitude only; altitude is
not recorded.
•
% (flashing): Location not recorded.
R button