Nikon D70S User Manual

Page 182

Advertising
background image

172

Connections—Connecting to a Computer

Connecting the USB Cable

1

Turn the computer on and wait for it to start up.

2

Turn the camera off.

3

Connect the UC-E4 USB cable as shown below. Connect the camera

directly to the computer; do not connect the cable via a USB hub or key-
board.

Windows 2000 Professional, Windows Millennium Edition (Me),

Windows 98 Second Edition (SE)

Do

NOT

select PTP when using PictureProject under one of the above operating sys-

tems. If the camera has been connected to a computer running one of the above
operating systems with PTP selected, the Windows hardware wizard will be displayed.
Click Cancel to exit the wizard, and then disconnect the camera. Be sure to select
Mass Storage before reconnecting the camera.

Advertising