Nikon D70S - Manual (Page 25)

15
Using the Optional MS-D70 CR2 Lithium Battery Holder
When inserted in the MS-D70 battery holder (available separately), CR2 lithium bat-
teries can be used as a backup power source in place of the EN-EL3a. CR2 batteries
are however suited to use at a restricted range of temperatures. Read the following
notice before using CR2 batteries.
Using CR2 Lithium Batteries
Note the following when using CR2 lithium batteries: Note the following when using CR2 lithium batteries:
The capacity of CR2 batteries drops sharply when the ambient temperature is below
20 °C (68 °F).
Operation has been confi rmed with the following CR2 lithium batteries:
SANYO CR2 lithium batteries Toshiba CR2 lithium batteries
Maxell CR2 lithium batteries Energizer CR2 lithium batteries
The capacity of the above batteries may vary with storage conditions; in some cases,
they may cease to function before their expiry date. The presence of fi ngerprints or
other foreign matter on the battery terminals or on the battery contacts inside the
holder can also affect battery performance; clean the terminals and contacts with
a dry cloth before use.
Place three CR2 batteries in the MS-D70 battery holder
as shown in the illustration on the holder and insert the
holder in the battery chamber as described on the previ-
ous page. CR2 batteries can not be recharged.