Karcher PC 60-130 T - Manual (Page 15)

- 5
Using the timer, the heating and the oil sep-
arator of the appliance can be controlled in
a fully automatic manner.
A Daily overview of the programmed
switching times (5 = Friday)
B Channel status
C1 = Oil separator - Channel 1
C2 = Heating - Channel 1
C Operating voltage OK
Gear reserve operations
D Menu
E Display special functions
F Display summer/ winter time
G Current weekdays (1=Monday,
2=Tuesday...)
H Confirm
Yes
I Continue...
No
Recommendation:
– Run the oil separator for a few minutes
before heating.
– Take into account the heating time of
approx.1 hour of the heating element
while programming the timer.
Note
The operating instructions of the timer are
located in the switching cabinet.
Î
Set the timer according to the operating
instructions of the manufacturer.
Î Set the heating switch and the oil sepa-
rator switch to automatic mode at the
operating panel. Timer is activated.
Î Switch off the main switch and close.
Î Close cover.
Î Empty the detergent container.
Î Empty the pump.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Î
Drain off the detergent liquid.
Î Switch off the appliance and remove
the plug from the socket.
Î Release parking brakes.
Î Push the appliance.
Î When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Timer (optional) Shutting down
Frost protection
Transport
15 EN