ADC CUDA 3 - Manual (Page 268)

ADC Telecommunications, Inc.
266 C HAPTER 13: C ONFIGURING DHCP A UTHORITY
Enabling DHCP Authority
To enable or disable DHCP authority on an interface, perform the following
tasks:
Example
The following example enables DHCP authority on cable interface 1/1/1,
then uses the
show dhcp-authority command to verify the configuration:
Task Command
1. Enter interface mode. interface <c/s/i>
2. Enable DHCP Authority on the
current interface.
dhcp-authority {enable | disable}
cli:172.16.19.10:root# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# dhcp-authority enable
cli:172.16.19.10:interface:cable:csi(1/1/1)# show dhcp-authority
Range Number Lower Range Upper Range Status
---------------- ---------------- ---------------- ------
DHCP Authority Status enable
cli:172.16.19.10:interface:cable:csi(1/1/1)#