ADC CUDA 3 - Manual (Page 276)

ADC Telecommunications, Inc.
274 C HAPTER 14: C ONFIGURING IP
Viewing IP Interfaces
You can use the following commands to view IP interfaces:
■
show ip address: Use this command within interface configuration
mode to view a list of IP addresses added to that current physical
interface.
■
show ip interface: Shows IP address information and additional
information about the physical interface on which the IP interface resides:
■
When issued within interface configuration mode, displays only
information relevant to the current interface.
■
When issued within slot mode, displays all IP interfaces within the
current slot.
■
When issued in any other mode, displays all IP interface configured
throughout the system.
Example 1
The following example displays all IP addresses added to cable interface
1/1/1:
cli:192.168.208.3:interface:cable:csi(1/1/1)# show ip address
Chassis/Slot/Interface 1/1/1
row count: 2
IP Address Net Mask Interface Priority
---------------- ---------------- ---------- ----------
201.1.1.1 255.255.255.0 8781825 Other
201.1.2.1 255.255.255.0 8781825 Primary