ADC CUDA 3 - Manual (Page 338)

ADC Telecommunications, Inc.
336 C HAPTER 15: IP P ACKET F ILTERING
Applying Access Lists to Interfaces
After you create an access list, you can apply it to one or more interfaces to
filter traffic. Filters can be applied to either outbound or inbound interfaces
or both.
Note that filtering is enabled automatically when you apply an access list to
an interface.
You apply access lists to a specific interface by using the access-class
command. To do so, perform the following task within interface <c/s/i>
mode:
Task Command
Apply filters to the
current interface to
restrict incoming or
outgoing traffic. access-class <list number> {in | out}
priority <priority number>