Sony STR-DN1050 - Manual (Page 129)

You can also activate the pairing mode of the receiver by the following ways:
Press OPTIONS while the input is set to [Bluetooth], then select [Pairing].
Select [Bluetooth Pairing] in the Bluetooth Settings menu.
Related Topic
Controlling a BLUETOOTH device using the remote control
Checking the information of a connected BLUETOOTH device
Setting the Bluetooth Standby mode (Bluetooth Standby)
Setting BLUETOOTH audio codecs (Bluetooth AAC/Bluetooth aptX)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
118