Usb specifications – Sony STR-DN1050 User Manual

Page 131

Advertising
background image

ICD-AX412F
ICD-FX8
ICD-PX232/PX312F/PX333F
ICD-SX813/SX1000
ICD-UX502/UX513F/UX523F/UX532/UX543
ICD-TX50
ICZ-R50/R51
PCM-D100

The receiver is unable to read data in NTFS format.
The receiver is unable to read data other than that saved in the first partition of a hard disk drive.
Operation of models not listed here is not guaranteed.
Operation may not always be guaranteed even when using these USB devices.
Some of these USB devices may not be available for purchase in certain areas.
When formatting the above models, be sure to format using the model itself or the dedicated formatting software for
that model.
When connecting a USB device to the receiver, be sure to connect after the display Creating Library or Creating
Database on the USB device has disappeared.

USB specifications

Supported formats (*1)

The music file formats that can be played back by this receiver are as follows:
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR

AAC (*2):
16 kbps – 320 kbps, CBR, VBR

WMA9 Standard (*2):
40 kbps – 320 kbps, CBR, VBR

WAV:
32 kHz – 192 kHz, 16/24 bit PCM

FLAC:
44.1 kHz – 192 kHz, 16/24 bit FLAC

AIFF:
32 kHz – 192 kHz, 16/24 bit PCM

ALAC:
32 kHz - 96 kHz, 16/24 bit ALAC

DSD (for STR-DN1050 only):
2.8 MHz, 1 bit DSD

*1

Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed.

*2

The receiver does not play files encoded with DRM.

120

Advertising
This manual is related to the following products: