Sony STR-DN1050 - Manual (Page 368)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Controlling MHL devices
By connecting an MHL device with an MHL cable (not supplied), you can use One-Touch Play and Remote Easy
Control.
Note
This function allows communication with Sony “BRAVIA” Sync-compatible TVs using an HDMI cable (not supplied).
This function may not work depending on the connected MHL device.
This function can only work when:
The receiver is turned on.
[Control for HDMI] is set to [On].
The MHL device is connected via an MHL cable (not supplied) to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1050 only),
HDMI VIDEO 1 IN (MHL) (for STR-DN1050 only) or HDMI VIDEO IN (MHL) (for STR-DN850 only) jack.
One-Touch Play
The receiver switches to the appropriate input when you connect, play content, etc. from your MHL device.
Remote Easy Control
You can use the / / / , , RETURN, OPTIONS, HOME (*), , , and / buttons on the remote control
to control your MHL device.
* Hold down HOME to display the home menu of the MHL device.
Related Topic
Using MHL (Mobile High-Definition Link) connections
Controlling HDMI devices (Control for HDMI)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
357