Sony STR-DN1050 - Manual (Page 244)

18. PHONES jack
Connect headphones here.
Indicator light above (on/standby) button (1)
Green: The receiver is turned on.
Amber: The receiver is in standby mode, and:
[Control for HDMI], [Network Standby] (*1), or [Bluetooth Standby] is set to [On].
[Pass Through] is set to [On] (*2) or [Auto].
The receiver in zone 2 is turned on.
Indicator turns off when the receiver is in standby mode and [Control for HDMI], [Pass Through], [Network Standby]
(*1), and [Bluetooth Standby] are set to [Off], and the receiver in zone 2 is turned off.
*1 For USA and Canadian models only
*2 For USA, Canadian, Mexican, and Australian models only
Note
The indicator flashes slowly when a software update is in progress.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
233