Sony STR-DN1050 User Manual
Page 98
Component video cable (not supplied)
Video cable (not supplied)
Audio cable (not supplied)
Optical digital cable (not supplied)
Note
Connect a TV monitor or a projector to the HDMI OUT or MONITOR OUT jack on the receiver.
Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may
be distorted. If this is the case, place the antenna (aerial) farther away from the receiver.
When connecting an optical digital cable, insert the plugs straight until they click into place.
Do not bend or tie optical digital cables.
Hint
All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.
The receiver has a video conversion function. For details, see “
Function for conversion of video signals
When connecting a TV to the receiver via the TV IN jacks of the receiver, set the sound output jack of the TV to
[Fixed] if it can be switched between either [Fixed] or [Variable].
Related Topic
Enjoying sound of TV broadcasts from the receiver
87