Sony STR-DN1020 - Manual (Page 37)

37 GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm masterpage: Right
STR-DN1020
4-273-051-14(1)
Pre
p
ar
ing the
R
eceive
r
Setting the speakers
Select the speaker pattern according to the
speaker system which you are using.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press V/v repeatedly to select
“ Settings”, then press or
b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Speaker”, then press or b.
4
Press V/v repeatedly to select
“SP Pattern”, then press or
b.
5
Press V/v repeatedly to select
the speaker pattern you want,
then press
.
6
Press RETURN/EXIT O.
You can switch the usage of the speaker(s)
connected to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals in accordance with the intended use.
Notes
• This setting is only available if the “SP Pattern” is
set to a setting without surround back and front
high speakers.
• Be sure to set the “SB Assign” before you perform
Auto Calibration.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press V/v repeatedly to select
“ Settings”, then press or
b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Speaker”, then press or b.
Selecting the speaker pattern
Setting the surround back
speakers
continued