Video settings menu – Sony STR-DN1020 User Manual
Page 97
97
GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Right
STR-DN1020
4-273-051-14(1)
Adjusting Settings
Video Settings menu
You can make settings for video.
x Resolution (Converting video signals)
Lets you convert the resolution of analog video input signals.
z : Video signals are converted and output through the video converter.
a : The same type of signal as that of the input signal is output. Video signals are not converted.
– : Video signals are not output.
a)
The resolution is set automatically, depending on
the connected monitor.
b)
When the TV is connected to jacks other than the
HDMI jacks, 480i/576i signals are output.
c)
480p/576p signals are output even if 480i/576i is
set.
d)
Video signals without copyright protection are
output based on the settings menu. Video signals
with copyright protection are output as 480p/576p.
Notes
• Video signals are not output from the
COMPONENT VIDEO MONITOR OUT or
MONITOR VIDEO OUT jacks when the monitor,
etc., is connected to HDMI TV OUT jack.
• If you select a resolution that the connected TV
does not support in the “Resolution” parameter, the
images from the TV cannot be output correctly.
• Converted HDMI image output does not support
x.v.Color (x.v.Colour), Deep Color (Deep Colour)
and 3D image.
“Resolution”
parameter
HDMI TV OUT
jack
COMPONENT
VIDEO MONITOR
OUT jacks
MONITOR VIDEO
OUT jack
• DIRECT
COMPONENT VIDEO IN
jacks
z
a)
a
–
VIDEO IN jacks
z
a)
–
a
• AUTO(CVBS)
(default setting)
COMPONENT VIDEO IN
jacks
z
a)
z
b)
z
b)
VIDEO IN jacks
z
b)
z
b)
• 480/576i
COMPONENT VIDEO IN
jacks
z
c)
z
z
VIDEO IN jacks
z
c)
z
z
• 480/576p
COMPONENT VIDEO IN
jacks
z
z
–
VIDEO IN jacks
z
z
a
• 720p
• 1080i
COMPONENT VIDEO IN
jacks
z
z
d)
–
VIDEO IN jacks
z
z
d)
a
• 1080p
COMPONENT VIDEO IN
jacks
z
a
–
VIDEO IN jacks
z
–
a
Input from
Output from