Sony SU-LW1 - Manual (Page 11)

11
(US)
Step 4: Install the Plate Unit on the wall
1
2
Temporarily secure the Plate Unit to
the wall using a screw. Align the
Plate Unit to make it level with the
floor.
WARNING
• The screw used in this procedure is not supplied
with the unit.
• Select a screw suitable for the material and the
structure of the wall.
Plate Unit
Hole used for temporarily
attaching the Plate Unit
Align the Plate Unit.
Secure the Plate Unit to the wall
using four or more M6 or equivalent
screws (not supplied).
1 Tighten the screws firmly so that the Plate Unit can
support the weight of the display.
2 Tighten the screw used in 1.
WARNING
The wall must be strong enough to support at least
four times the weight of the display that you installing
(9 (US)). Make sure the wall has sufficient strength.
Reinforce the wall if necessary.
2
1