Sony RM-NU1 - Manual (Page 23)

23 GB
Ne
twor
k co
nne
ction
s
Network connections
Connecting the unit to your home network
(network settings)
This section explains how to connect the unit to your home network.
Check your connection method using the chart below.
For details on which connection method your wireless LAN router/access point supports, refer to the
operating manual of your wireless LAN router/access point.
*
1
WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to setup a wireless network
easily and securely.
*
2
You can use the manual setup method when you cannot find the desired access point using the access point scan
method.
What the unit can do when connected to a network
This unit can control DLNA-compliant devices on your home network as a DLNA controller.
You need a wireless
LAN router/access
point.
Are you going to use a WPS*
1
setting method to connect the unit
to your home network?
No
Go to “WPS Push-
button
Configuration”
(page 26).
Do you have a wireless LAN router/access point?
Yes
Yes No
Go to “Access Point
Scan” (page 24). Go to “WPS PIN
Method” (page 27).
Which connection method do you intend to use, the WPS push button
configuration method or the WPS PIN code method?
Push button
configuration
method
PIN code
method
Go to “Manual
Registration”
(page 25).
*
2