Sony RM-NU1 - Manual (Page 63)

63 GB
A
d
di
ti
o
nal
i
n
for
m
a
tio
n
Using an infrared device
in a DLNA Activity
When you perform a registered DLNA Activity, in
additional to using DLNA devices, you can also
use infrared devices. You can turn the infrared
device on or off, switch input operations, and
adjust the volume level.
This operation is useful when you want to output
the sound from a receiver connected to the
renderer (network controlled player), etc.
This section explains how to enjoy content from a
receiver connected to the renderer (network
controlled player).
Note
You have to register infrared devices you want to use with
this unit in advance. Refer to “Adding and using infrared
devices” (page 49) for details on how to register infrared
devices.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap the “Device” tab.
3
Tap the desired DLNA-compliant
device.
The Activity list appears.
4
Tap and hold the desired Activity.
A menu appears.
5
Tap “Edit Activity.”
6
Tap “Edit Device/Start Action.”
A confirmation screen appears.
7
Tap “OK.”
8
Tap “For outputting sound,” then
tap “Next
b.”
9
Tap the device for outputting
sound, then tap “Next
b.”
Note
The items that can be selected are different,
depending on the device.
10
Tap the desired power operation of
the device for outputting sound.