Playing cds, Locating a disc directly using the remote z 1 – Sony CDP-CX400 User Manual
Page 13
Playing CDs
13
Playing CDs
First character
Locating a disc directly using the remote Z
1
Press DISC.
2
Press the number button of the disc.
Example: To enter number 35
Press 3 then 5.
To enter number 100
Press 1, then 10/0 twice.
3
Press ENTER to start play.
Locating a disc by searching for a specific
Disc Name (Name Search)
You can search for and locate a desired disc by the first
character of the Disc Name (see page 20). The Name
Search function can display the Disc Name in
alphabetical order.
1
Press NAME SEARCH.
“NAME SEARCH” appears in the display.
2
Turn the JOG dial to find the desired disc.
As you turn the JOG dial, the Disc Names starting
with the input character appear in the display.
The following characters are displayed as the first
character.
A B C D E F G H I J K L M N O P Q R S T U V W X
Y Z 0 1 2 3 4 5 6 7 8 9
If “NOT FOUND” appears in the display while
inputting the first character with the JOG dial, no
disc has been labeled using the input character.
Notes
• When searching for input characters, blanks and
symbols before the first character in the Disc Name are
ignored.
• When searching for input characters, upper and lower
cases cannot be differentiated.
3
Push the JOG dial to select the disc.
In Program Play mode, the disc will be added to
the end of the program.
To cancel Name Search
Press NAME SEARCH again.
Note
The Name Search function on the player does not work
during ALL DISCS shuffle play.
To locate a disc by scanning each Disc Name
(Name Scan) Z
You can locate a desired disc quickly by scanning the
Disc Names (see page 20) in the display.
Note that you cannot use this function in the ALL
DISCS Shuffle Play mode.
1
Press NAME SCAN.
“NAME SCAN” appears in the display, and the
Disc Names scroll in the display.
2
Press H when the Disc Name of the desired disc
appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc is added to the end
of the program if you press ENTER instead of H.
Note
If “NO ENTRY” appears in the display, no disc has been
labeled with the Disc Name. Try the Name Scan function
again after labeling the discs.
DISC
CD TEXT
1
CD2
GROUP
NO DELAY
MULTI
PROGRAM 1 2 3 X-FADE
DELETE
CD3
REPEAT
SHUFFLE
1
SEC
STEP
MIN
ART.
GROUP
TRACK
HIT
ART.
NEXT
2nd
ALL
S
DISC
S O N Y H I T
* *
S
* * *
CD1