Sony CDP-CX400 - Manual (Page 7)

Getting Started Getting Started
7
I / 1
Notes
• Do not connect any player other than the one used as the
second player to the 2ND CD IN jacks of this player.
• When connecting a second CD player, do not connect the
DIGITAL OUT (OPTICAL) connector of this player to the
amplifier.
Changing the command mode of the player
1
Press MENU/NO.
2
Turn the JOG dial until “Command Mode?”
appears in the display.
3
Push the JOG dial.
The current command mode appears.
4
Turn the JOG dial to select CD1 or CD2, then push
the JOG dial again.
MENU/NO
SEC STEP MIN ART. GROUP TRACK HIT ART. NEXT 2nd DISC
1 GROUP
NO DELAY TEXT CD MULTI
PROGRAM 1 2 3 X-FADE DELETE
CD3
REPEAT SHUFFLE 1
CD1 CD2
ALL S DISC
* C D 1 [ C D ] C 2 D 3 *
Current command mode
JOG
I / 1
Inserting CDs
You can insert up to 400 discs into this player.
1
Press ?/1 to turn on the player.
2
Open the front cover by pressing OPEN/CLOSE.
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the small display).
Rotary table
Loading position
Playing position
OPEN/CLOSE JOG ?/1
Top view of the disc slot
Disc slot at the loading position
Disc number
I / 1
(continued)
Small
display