Sony MZ-RH1 - Manual (Page 33)

5
Confirm that the operation lamp is off ( ), and then press and slide REC on the
recorder ( ).
The operation lamp lights up in red and recording starts.
If you insert a previously recorded disc, the recording starts after the existing contents.
REC
The operation lamp 

Basic recording operations
To Press
Stop Press  · CANCEL. (The operation lamp disappears.)
Pause Press *. (The operation lamp flashes in red.) Press  again to resume
recording.
Remove the disc Press  · CANCEL and open the lid. (The lid does not open until
“SystemFILE WRITING” disappears from the display and the operation
lamp stops flashing.)
Adding track marks Press T MARK. (The operation lamp disappears for a moment.)
* A track mark is added at the point where you press

again to resume recording while pausing; thus the
remainder of the track will be counted as a new track.
33
MZ-RH1/MZ-M200.GB.2-669-084-11(1)
Recording on a disc