Sony MZ-RH1 - Manual (Page 64)

Symptom Case and/or corrective action
The rechargeable battery cannot
be charged sufficiently through
USB bus power.
 If you operate the recorder while it is connected to a computer, it
takes time for the rechargeable battery to be sufficiently charged
by USB bus power. For faster charging, do not operate the
recorder.
The installation was not
successful.
 You are using an OS that does not support this software ( page
19).
 All windows applications are not closed. If you start the
installation while other programs are running, a malfunction
may occur. This is especially true for programs that require large
amounts of system resources, such as virus-check software.
 There is not enough hard disk space on your hard disk. You need
200 MB or more free space on your hard disk.
The installation appears to have
stopped before it has completed.
 Check for the appearance of an error message beneath the
installation window. Press the [Alt] key or [Tab] key to display
any message that has appeared, and then follow the displayed
instructions. If there is no message, the installation is still in
progress. Wait a little while longer.
The progress bar on the display is
not moving or the access lamp has
not lit for a few minutes during the
installation.
 The installation is progressing normally. Please wait. The
installation may take 30 minutes or more, depending on your CD
drive or system environment.
You cannot record audio data
when you press and slide the REC
switch while using the MD Simple
Burner software.
 The recorder is not correctly connected to the computer. Connect
the recorder and your computer correctly using the USB cable.
 Audio CD is not inserted in CD drive of the computer. Insert
Audio CD.
 The capacity of the disc is insufficient. Insert another disc.
Even though the recorder is
recognized by the computer, it
does not operate normally.
 A USB hub is used. Connect the USB cable directly to the USB
port of the computer.
 You are using the recorder at a place with vibration. Use the
recorder at a place with no vibration.
The recorder cannot be used as a
storage device.
 The SonicStage or MD Simple Burner software is active. Close
the SonicStage or MD Simple Burner software.
The playing time of a transferred
track is different from the time
that appears on your computer
monitor.
 This is due to a calculation discrepancy between the recorder and
the computer.
64
MZ-RH1/MZ-M200.GB.2-669-084-11(1)