Sony MZ-RH1 - Manual (Page 46)

Customizing sound quality
You can customize the sound and store the
results in “Custom1” and “Custom2”.
1 Do steps 1 to 3 of “Selecting the sound
quality (6-Band Equalizer)” ( page 45),
and select “Custom1” or “Custom2”.
2 Press the jog lever.
3 Move the jog lever toward
/
repeatedly to select the frequency range.
Frequency range (100 Hz)
There are six frequency ranges.
100 Hz, 250 Hz, 630 Hz, 1.6 kHz, 4 kHz, 10 kHz
4 Turn the VOL +/– control repeatedly to
select the sound level.
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB, +10 dB
5 Repeat steps 3 and 4 to make adjustments
for the remaining frequency ranges.
6 Press the jog lever to enter the selection.
Normalizing the playback
sound level automatically
(Dynamic Normalizer)
This function automatically normalizes the
sound level of the recorded material for
comfortable listening during playback.
1
While playing, press SOUND
repeatedly until “D-Normal” appears
in the display.
“d” appears at
.
2
Turn the VOL +/– control to adjust
the volume.

• Since this function automatically balances the
sound level, it minimizes troublesome volume
adjustments, especially for discs containing tracks
with very different volume levels.
• This function allows you to hear low-volume
sounds in places where the surrounding noise is
loud without having to turn up the volume too
high.
To cancel the setting
Press SOUND repeatedly until “Normal”
appears in the display.
46
MZ-RH1/MZ-M200.GB.2-669-084-11(1)