Sony MZ-RH1 - Manual (Page 58)

2
Turn the VOL +/– control to select
a letter and press the jog lever to
enter.
The selected letter appears and the cursor
moves to the next input position.
The buttons and control used for character
input and their functions are listed below.
Functions Operation
To move the cursor
to the left or right. Move the jog lever
toward
/.
To enter a letter. Press the jog lever
(
/ENT).
To switch between
capital letters,
small letters, and
numbers/marks
(A
a0).
Press P MODE/ .
To switch capital
letters and small
letters. (A
a)
Press SOUND.
To insert a blank
space. Press +.
To delete a letter. Press –.
3
Repeat step 2 and enter all
characters of the label name.
4
Press the jog lever for 2 seconds or
more to enter the title.
Notes
• The recorder is able to display, but cannot label
using Japanese “Katakana” characters.
• The recorder cannot rewrite a track name, a group
name, an artist name, an album name, or a disc
name of more than 200 letters that was created by
another device (in MD mode only).
Option menus
Select “Option” in the menu. Option menus can be used on both the recorder and the remote.
Items Options (item displayed on the remote is in parentheses) (  : Default settings)
AVLS 1) Off
(AVLS Off)

The volume changes without limiting the volume level.
On
(AVLS On) The volume is limited to minimize sound leakage or sound pressure
on the ears. If the volume is turned up too high, “AVLS NO VOL
OPERATION” appears and the volume is kept at a moderate level.
Beep Off (Beep Off) The beep is turned off.
On (Beep On)  The beep sounds when you operate the recorder.
58
MZ-RH1/MZ-M200.GB.2-669-084-11(1)