Sony MHC-M100 - Manual (Page 11)

11
Getting Started
2
Press and hold + or – until the
frequency indication starts to change,
then release it.
Scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
3
Press TUNER MEMORY.
A preset number appears in the display.
Preset number
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
4
Press ENTER.
The station is stored.
The stations are stored from preset number 1.
5
Repeat steps 1 to 4 to store additional
stations.
To tune in a station with a weak
signal
Press + or – (or TUNING +/– on the remote)
repeatedly in step 2 to tune in the station
manually.
To set an existing preset number
to another station
Start over from step 1. After step 3, turn
SELECTOR to select the preset number you want
to change, then overwrite the preset number to the
desired station.
To erase a preset station
1 Keep pressing TUNER MEMORY until a preset
number appears in the display.
ALL 1 DISC S
PROGRAM
SHUFFLE
REPEAT 1
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz 1 2 REC SLEEP
VOLUME
2 3 4 5
2 Turn SELECTOR to select the preset number you
want to erase.
Select “ALL ERASE” when you want to erase all
the preset stations.
3 Press ENTER.
“COMPLETE” appears.
When you erase a preset number, the preset
number decreases by one and all preset numbers
following the erased one are renumbered. You can
add a new preset number after the last preset
number.
To change the AM tuning
interval
The AM tuning interval is factory set to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval, tune in any AM station first, then turn off the
power. While holding down the ENTER button, turn
the power back on. When you change the interval,
AM preset stations will be erased. To reset the
interval, repeat the same procedure.
Tip
The preset stations are retained for half a day even if
you disconnect the power cord or if a power failure
occurs.