Sony MHC-M100 - Manual (Page 46)

46
DVD 5.1CH FUNCTION
When your DVD player has 5.1
channel analog outputs
Make sure to match the color of the plugs and the
connectors. To listen to the sound of the connected
DVD player, press DVD 5.1CH so that its
indicator lights up.
When you listen to a stereo sound track of the
DVD player, press DVD 5.1CH so that its
indicator goes off.
When your DVD player has
stereo analog outputs
Make sure to match the color of the plugs and the
connectors. Connect the LINE OUT (audio)
output jack of your DVD player to the FRONT
jacks of DVD INPUT with the audio connecting
cable. To listen to the sound of the connected
DVD player, press DVD 5.1CH so that its
indicator goes off.
Notes
• Each time you press DVD 5.1CH, the function
changes as follows.
DVD 5.1CH
y DVD (2 channel)
(indicator: on) (indicator: off)
• You cannot enjoy the 5.1 channel surround sound if
you connect a DVD player which does not have the
5.1 channel analog outputs.
• If there is no sound when you connect a DVD
player which has 5.1 channel analog outputs,
connect the LINE OUT (audio) output jacks of your
DVD player to the MD/VIDEO IN jacks, then
change the function to MD by pressing FUNCTION
until “MD” appears in the display.
Connecting a DVD player
(continued)