Sony MHC-M100 - Manual (Page 6)

6
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Note on placement
Be sure to place this unit on a horizontal place.
If the unit is slanted, it may cause malfunction or
damage to the system.
6
Connect the power cord to a wall outlet.
Demonstration appears in the display. When
you press ?/1 (power), the system turns on
and the demonstration automatically ends. If
the supplied adapter on the plug does not fit
your wall outlet, detach it from the plug (for
models equipped with an adapter only).
To deactivate the demonstration
When you set the time (see “Step 3: Setting the
time” on page 9), the demonstration is deactivated.
To activate/deactivate the demonstration again,
press DISPLAY while the system is off.
Tip (MHC-M300AV only)
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer connector.
Inserting two size AA (R6)
batteries into the remote
For MHC-M500AV/M300AV
e
E
e
E
For MHC-M100
E
E
e
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Step 1: Hooking up the system
(continued)