Sony MHC-M100 - Manual (Page 21)

Basic Operations
21
To Do this
Stop play Press x.
Pause Press X PAUSE (X on the
remote). Press again to
resume play.
Fast-forward Press M for the front side or
m for the reverse side.
Rewind Press m for the front side or
M for the reverse side.
Remove the tape Press A.
Adjust the volume Turn VOLUME (or press
VOLUME (VOL) +/– on
the remote).
Tips
• Pressing TAPE A (or TAPE B) h H when the
power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play).
• You can switch from another source to the tape just
by pressing TAPE A (or TAPE B) h H
(Automatic Source Selection).
Searching for the beginning of
the current track or the next one
(AMS)
During playback, press . or > pointing in
the same direction as the h or H indicator to
go to the beginning of the next track. Press the
opposite direction to go to the beginning of the
current track.
The search direction and +1 (the next track) or –1
(the current track) appear in the display.
Example: searching the next song
TEXT DELETE
FILE DISC GROUP SYNC TRACK ART MONO STEP
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
CD TEXT
HI-LIGHT
TUNED
MANUAL
AUTO
PRESET
1
kHz
MHz 1 2 REC SLEEP 2 3 4 5
Note
• The tape stops automatically after repeating the
sequence five times.
• The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When completely different information is
recorded on the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)