Sony VGC-RA710G - Manual (Page 40)

VAIO Digital Studio Computer Quick Start
40
4 Insert the plug end of the splitter device into the wall jack.
5 Plug the modem cable into the modem line jack located on the back panel of
the computer.
To connect the telephone and modem cables
Your computer has a protective sticker covering the Ethernet port located
on the rear panel. Connect 10BASE-T, 100BASE-TX, or 1000BASE-TX cables to
the Ethernet port, depending on your computer’s Ethernet port specification.
Using incorrect cables or a telephone cable may result in an electric current
overload that can cause a malfunction, excessive heat, or fire in the Ethernet
port. For help on connecting to a network, see your network administrator.
“1-to-2” jack adapter
(splitter - optional)