Sony VGC-RA710G - Manual (Page 58)

VAIO Digital Studio Computer Quick Start
58
Setting Up Additional Equipment
This section illustrates how to connect additional equipment with your VAIO
Digital Studio® computer.
Connecting devices with an audio cable
Your computer has both audio and video connection capability. You can locate
the appropriate connections on the back panel or behind the lower bottom panel
on the front of the computer. You can connect a VCR or camcorder, using the
composite audio In jacks.
1 Connect a dual audio cable (optional) to the composite audio L and R In
jacks, located on the either the front or rear panels of your computer.
2 Connect the other ends of the dual audio cable to your VCR or camcorder.
Connecting devices with an S-video cable
Your VCR or camcorder may have either standard video or S-video connection
capability.
1 Connect an S-video cable (optional) directly into the S-video jack on either
the front or back panel of your computer.
2 Connect the other end of the S-video cable into the appropriate port on your
compatible VCR or camcorder.