Sony VGC-RA710G - Manual (Page 54)

VAIO Digital Studio Computer Quick Start
54
Option 2
1 Connect one end of the TV coaxial cable (supplied) to your cable service
access. Connect the other end to the In jack on the back panel of your set-top
box.
2 Connect a second TV coaxial cable (optional) to the Out jack on your set-top
box. Connect the other end to the VHF/UHF port on the rear of your TV
monitor or display.
3 Connect one end of the stereo A/V dubbing cables with triple RCA jacks
(optional) to the Video Out and Audio-OUT (L/R) jacks on the back panel of
your set-top box, matching the plug and jack colors.
4 Connect the other RCA jacks of the stereo dubbing cable into the Audio-R
(IN), Audio-L (IN), and Composite video (IN) jacks on the back panel of
your computer, matching the plug and jack colors.
To connect in set-top box mode (Option 2)
✍
You can connect your computer to a set-top box using an S-video cable (optional)
instead of a stereo A/V dubbing cable (optional). See “Setting Up Additional
“Setting Up Additional
Equipment” on page 58.
VHF/UHF
IN
VHF/UHF
OUT
Stereo A/V dubbing cables
with triple RCA plugs
(optional)
Cable
service
access
TV coaxial
cables
(1-supplied)
VHF/UHF
port
Audio R-In
Audio L-In
Composite
Video
Video
-Out
Audio-Out
(L/R)