Sony VGC-RA710G - Manual (Page 50)

VAIO Digital Studio Computer Quick Start
50
Connecting to a standard antenna (air) system
You can connect your computer to an indoor/outdoor antenna system, using
Option 1 or 2 from the previous section, “Connecting to standard cable access
(CATV)” on page 48. The antenna system in your home may require a VHF/UHF
RF combiner/transformer (optional) to connect your computer and the
indoor/outdoor antenna system.
Option 1
1 Connect one end of a TV coaxial cable (optional) to your antenna outlet.
Connect the other end to a VHF/UHF RF combiner/transformer (optional).
2 Connect the TV coaxial cable (supplied) from the combiner/transformer to
the VHF/UHF port on the back panel of your computer.
Option 2
1 Connect both ends of the antenna’s twin lead cable to the screw-type grips
on the combiner/transformer.
2 Connect the TV coaxial cable (supplied) from the combiner/transformer to
the VHF/UHF port on the back panel of your computer.
✍
If you are connecting to an indoor/outdoor antenna system, you may need to reorient
the antenna for better reception.