Sony STR-DH800 - Manual (Page 10)

10 US
Name Function
H Tuning
indicators
CAT
MEM
MONO
ST
SIRIUS
Lights up when the receiver
tunes in radio stations, or
satellite radio stations.
The category mode is set to
“ONE CAT” during the satellite
radio operation (page 75).
Lights up when a memory
function, such as Preset
Memory (page 69), etc., is
activated.
Monaural broadcast
Stereo broadcast
The SiriusConnect Home tuner
is connected and “SIRIUS” is
selected.
I SP A/SP B/
SP A+B
Lights up according to the
speaker system used (page 33).
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
J SLEEP
Lights up when the sleep timer
is activated (page 99).
K A.DIRECT
Lights up when the receiver is
processing Analog Direct
signals.
L S-AIR
Lights up when the S-AIR
transmitter (not supplied) is
connected.
M Dolby
Pro Logic
indicators
PL
PL II
PL IIx
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Note
These indicators do not light up
when either the center speaker
and surround speaker is not
connected.
N BI-AMP Lights up when surround back
speakers selection is set to
“BI-AMP” (page 100).
O EQ Lights up when the equalizer is
activated.
Name Function
P NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 63).
Q DTS-HD
indicators
DTS-HD
MSTR
DTS-HD HI
RES
Lights up one of the respective
indicators when the receiver is
decoding the corresponding
DTS-HD format signals.
DTS-HD Master Audio
DTS-HD High Resolution
Audio
R LPCM Lights up when Linear PCM
signals are detected.
S DMPORT
Lights up when DIGITAL
MEDIA PORT adapter is
connected and “DMPORT” is
selected.
T HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN jack
(page 25).
U Playback
channel
indicators
L
R
C
SL
SR
S
SBL
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes or upmixes
the source sound (based on the
speaker settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO