Sony STR-DH800 - Manual (Page 75)

75 US
T
u
n
e
r Oper
a
tions
2
Press CATEGORY MODE
repeatedly to select the “ONE
CAT”.
• ALL CAT: You can select a channel
from all the categories. The initial
setting is “ALL CAT”.
• ONE CAT: You can select a channel
from one category. “CAT” is displayed
on the display when you set to “ONE
CAT” mode.
3
Press CATEGORY + or
CATEGORY – to select the
category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press TUNING + or TUNING – to
select the channel.
You can also press TUNING MODE on
the receiver to select “AUTO”, and then
press TUNING + or TUNING – to select
a channel.
Notes
• When you select a channel in the “ONE CAT”
mode, the channel you selected may not be the one
in the category you want. This is because one
channel may belong to more than one category.
• If you press CATEGORY + or CATEGORY – in
the “ALL CAT” mode, the first channel of the next
or previous category is selected (CATEGORY
SKIP).
1
Press TUNER repeatedly to
select “SIRIUS”.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press SHIFT.
4
Press the numeric buttons to
enter the channel number.
5
Press ENT/MEM.
You can also use MEMORY/ENTER on
the receiver.
The selected channel is tune in.
Press DISPLAY on the receiver
repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name
t Channel number t
Category name t Artist name/Feature t
Song/Program title t Composer name t
Signal strength t Sound field type
Selecting channels by inputting
the channel number directly
(DIRECT TUNING)
Displaying the SIRIUS Satellite
Radio information on the front
panel display
?/1
PHONES
SPEAKERS
INPUT SELECTOR
INPUT MODE TUNING MODE
MASTER VOLUME
TONE MODE DISPLAY DIMMER MUTING MEMORY/ ENTER 2CH/ A.DIRECT A.F.D. MOVIE MUSIC TUNING
TONE
VIDEO 2 IN VIDEO L AUDIO R AUTO CAL MIC
DISPLAY